Sales office and service Gdansk: +48 58 320 13 05 | Sales office Warsaw: +48 504 060 713 | PL | EN
Sales office and service Gdansk: +48 58 320 13 05 | Sales office Warsaw: +48 504 060 713 | PL | EN
Imer Machinery >> Imer Truck Mixers >> ORU LT 105EH
The model LT 105EH, with a nominal capacity of 10m3, has an increased angle of inclination of the mixer – from 10 to 13 degrees. This has resulted in a larger water volume and the body is slightly shorter than standard. The bottom of the drum is made of S355J0 steel with a thickness of 6 mm. The walls are made of 30MnB5 wear-resistant steel with a thickness of 4mm. The same steel is used for the mixing spirals. The drum is rotated by a two-stage planetary gearbox, which is driven by a variable displacement hydraulic pump.
The oil is cooled by a powerful radiator with a built-in reservoir. The body has a pressurised steel water tank with a capacity of 400 or 650 litres. The water system is additionally equipped with a water meter that allows to measure water from 0 to 500 litres (in accordance to concrete recipe).
The model LT 105EH, with a nominal capacity of 10m3, has an increased angle of inclination of the mixer – from 10 to 13 degrees. This has resulted in a larger water volume and the body is slightly shorter than standard. The bottom of the drum is made of S355J0 steel with a thickness of 6 mm. The walls are made of 30MnB5 wear-resistant steel with a thickness of 4mm. The same steel is used for the mixing spirals. The drum is rotated by a two-stage planetary gearbox, which is driven by a variable displacement hydraulic pump.
The oil is cooled by a powerful radiator with a built-in reservoir. The body has a pressurised steel water tank with a capacity of 400 or 650 litres. The water system is additionally equipped with a water meter that allows to measure water from 0 to 500 litres (in accordance to concrete recipe).
Technical data:
EH version
Nominal volume 10 m3
Geometric volume 17.542 m3
Installation height 2826 mm
Min. overall length 6685 mm
Min. installation width 2500 mm
Drum speed 0-14 rpm
Discharge capacity 15 – 40 s/m3 depending on the consistency of the concrete
Weight (empty) 4400 kg
Rollers: quantity 2 – diameter 280 mm
Truck requirements: 8×4
Standard equipment:
PMP two-stage planetary gearbox
Variable displacement hydraulic pump PMP
Oil cooler with integrated tank and filter, electric fan with thermostat
Mechanical control of rotation / direction of rotation of the mixer (via cable control)
GAS+, GAS-, START, STOP motor control, safety switch on the back of the mixer
Auxiliary control at the back of the mixer with horn
Working lamps 4 pieces (2 pieces on the beam of the rear lights, 1 piece mounted under the platform, 1 piece on the platform for illumination of the hopper)
Rear-view camera
180° rotating chute L=1500 mm with support and screw jack for angle adjustment
2 lightweight (polystone) extension chutes L=1000 with brackets
Wear-resistant protective sheet on the main inlet hopper, discharge V-hopper and rotating chute
Rubber collar for hopper and discharge V-hopper
Telescopic ladder with platform and protection gate
Pressurised steel water tank with 650 l capacity
Pressurised water system
Water connection for filling the tank on both sides
Water meter 0-500 l
Washing hose at the base of the ladder and at the inspection platform
Single-axle polymer mudguards with mud flaps
Cover between the frame beams
Standard rear bumper with operator platforms on both sides
Technical data:
EH version
Nominal volume 10 m3
Geometric volume 17.542 m3
Installation height 2826 mm
Min. overall length 6685 mm
Min. installation width 2500 mm
Drum speed 0-14 rpm
Discharge capacity 15 – 40 s/m3 depending on the consistency of the concrete
Weight (empty) 4400 kg
Rollers: quantity 2 – diameter 280 mm
Truck requirements: 8×4
Standard equipment:
PMP two-stage planetary gearbox
Variable displacement hydraulic pump PMP
Oil cooler with integrated tank and filter, electric fan with thermostat
Mechanical control of rotation / direction of rotation of the mixer (via cable control)
GAS+, GAS-, START, STOP motor control, safety switch on the back of the mixer
Auxiliary control at the back of the mixer with horn
Working lamps 4 pieces (2 pieces on the beam of the rear lights, 1 piece mounted under the platform, 1 piece on the platform for illumination of the hopper)
Rear-view camera
180° rotating chute L=1500 mm with support and screw jack for angle adjustment
2 lightweight (polystone) extension chutes L=1000 with brackets
Wear-resistant protective sheet on the main inlet hopper, discharge V-hopper and rotating chute
Rubber collar for hopper and discharge V-hopper
Telescopic ladder with platform and protection gate
Pressurised steel water tank with 650 l capacity
Pressurised water system
Water connection for filling the tank on both sides
Water meter 0-500 l
Washing hose at the base of the ladder and at the inspection platform
Single-axle polymer mudguards with mud flaps
Cover between the frame beams
Standard rear bumper with operator platforms on both sides